LE Nordic SPP-like Streamer Server
Source Code: nordic_spp_le_streamer.c
All newer operating systems provide GATT Client functionality. This example shows how to get a maximal throughput via BLE:
- send whenever possible,
- use the max ATT MTU.
In theory, we should also update the connection parameters, but we already get a connection interval of 30 ms and there's no public way to use a shorter interval with iOS (if we're not implementing an HID device).
Note: To start the streaming, run the example. On remote device use some GATT Explorer, e.g. LightBlue, BLExplr to enable notifications.
Track throughput
We calculate the throughput by setting a start time and measuring the amount of data sent. After a configurable REPORT_INTERVAL_MS, we print the throughput in kB/s and reset the counter and start time.
static void test_reset(nordic_spp_le_streamer_connection_t * context){
context->test_data_start = <a href="https://github.com/bluekitchen/btstack/blob/develop/src/btstack_run_loop.h#L273">btstack_run_loop_get_time_ms</a>();
context->test_data_sent = 0;
}
static void test_track_sent(nordic_spp_le_streamer_connection_t * context, int bytes_sent){
context->test_data_sent += bytes_sent;
// evaluate
uint32_t now = <a href="https://github.com/bluekitchen/btstack/blob/develop/src/btstack_run_loop.h#L273">btstack_run_loop_get_time_ms</a>();
uint32_t time_passed = now - context->test_data_start;
if (time_passed < REPORT_INTERVAL_MS) return;
// print speed
int bytes_per_second = context->test_data_sent * 1000 / time_passed;
printf("%c: %"PRIu32" bytes sent-> %u.%03u kB/s\n", context->name, context->test_data_sent, bytes_per_second / 1000, bytes_per_second % 1000);
// restart
context->test_data_start = now;
context->test_data_sent = 0;
}
HCI Packet Handler
The packet handler prints the welcome message and requests a connection parameter update for LE Connections
static void hci_packet_handler (uint8_t packet_type, uint16_t channel, uint8_t *packet, uint16_t size){
UNUSED(channel);
UNUSED(size);
uint16_t conn_interval;
hci_con_handle_t con_handle;
if (packet_type != HCI_EVENT_PACKET) return;
switch (hci_event_packet_get_type(packet)) {
case BTSTACK_EVENT_STATE:
// BTstack activated, get started
if (btstack_event_state_get_state(packet) == HCI_STATE_WORKING) {
printf("To start the streaming, please run nRF Toolbox -> UART to connect.\n");
}
break;
case HCI_EVENT_META_GAP:
switch (hci_event_gap_meta_get_subevent_code(packet)) {
case GAP_SUBEVENT_LE_CONNECTION_COMPLETE:
// print connection parameters (without using float operations)
con_handle = gap_subevent_le_connection_complete_get_connection_handle(packet);
conn_interval = gap_subevent_le_connection_complete_get_conn_interval(packet);
printf("LE Connection - Connection Interval: %u.%02u ms\n", conn_interval * 125 / 100, 25 * (conn_interval & 3));
printf("LE Connection - Connection Latency: %u\n", gap_subevent_le_connection_complete_get_conn_latency(packet));
// request min con interval 15 ms for iOS 11+
printf("LE Connection - Request 15 ms connection interval\n");
<a href="https://github.com/bluekitchen/btstack/blob/develop/src/gap.h#L1019">gap_request_connection_parameter_update</a>(con_handle, 12, 12, 4, 0x0048);
break;
default:
break;
}
break;
case HCI_EVENT_LE_META:
switch (hci_event_le_meta_get_subevent_code(packet)) {
case HCI_SUBEVENT_LE_CONNECTION_UPDATE_COMPLETE:
// print connection parameters (without using float operations)
con_handle = hci_subevent_le_connection_update_complete_get_connection_handle(packet);
conn_interval = hci_subevent_le_connection_update_complete_get_conn_interval(packet);
printf("LE Connection - Connection Param update - connection interval %u.%02u ms, latency %u\n", conn_interval * 125 / 100,
25 * (conn_interval & 3), hci_subevent_le_connection_update_complete_get_conn_latency(packet));
break;
default:
break;
}
break;
default:
break;
}
}
ATT Packet Handler
The packet handler is used to setup and tear down the spp-over-gatt connection and its MTU
static void att_packet_handler (uint8_t packet_type, uint16_t channel, uint8_t *packet, uint16_t size){
UNUSED(channel);
UNUSED(size);
if (packet_type != HCI_EVENT_PACKET) return;
int mtu;
nordic_spp_le_streamer_connection_t * context;
switch (hci_event_packet_get_type(packet)) {
case ATT_EVENT_CONNECTED:
// setup new
context = connection_for_conn_handle(HCI_CON_HANDLE_INVALID);
if (!context) break;
context->counter = 'A';
context->test_data_len = ATT_DEFAULT_MTU - 4; // -1 for nordic 0x01 packet type
context->connection_handle = att_event_connected_get_handle(packet);
break;
case ATT_EVENT_MTU_EXCHANGE_COMPLETE:
mtu = att_event_mtu_exchange_complete_get_MTU(packet) - 3;
context = connection_for_conn_handle(att_event_mtu_exchange_complete_get_handle(packet));
if (!context) break;
context->test_data_len = <a href="https://github.com/bluekitchen/btstack/blob/develop/src/btstack_util.h#L89">btstack_min</a>(mtu - 3, sizeof(context->test_data));
printf("%c: ATT MTU = %u => use test data of len %u\n", context->name, mtu, context->test_data_len);
break;
default:
break;
}
}
Streamer
The streamer function checks if notifications are enabled and if a notification can be sent now. It creates some test data - a single letter that gets increased every time - and tracks the data sent.
static void nordic_can_send(void * some_context){
UNUSED(some_context);
// find next active streaming connection
int old_connection_index = connection_index;
while (1){
// active found?
if ((nordic_spp_le_streamer_connections[connection_index].connection_handle != HCI_CON_HANDLE_INVALID) &&
(nordic_spp_le_streamer_connections[connection_index].le_notification_enabled)) break;
// check next
next_connection_index();
// none found
if (connection_index == old_connection_index) return;
}
nordic_spp_le_streamer_connection_t * context = &nordic_spp_le_streamer_connections[connection_index];
// create test data
context->counter++;
if (context->counter > 'Z') context->counter = 'A';
memset(context->test_data, context->counter, context->test_data_len);
// send
<a href="https://github.com/bluekitchen/btstack/blob/develop/src/ble/gatt-service/nordic_spp_service_server.h#L82">nordic_spp_service_server_send</a>(context->connection_handle, (uint8_t*) context->test_data, context->test_data_len);
// track
test_track_sent(context, context->test_data_len);
// request next send event
<a href="https://github.com/bluekitchen/btstack/blob/develop/src/ble/gatt-service/nordic_spp_service_server.h#L74">nordic_spp_service_server_request_can_send_now</a>(&context->send_request, context->connection_handle);
// check next
next_connection_index();
}